Easy Maltesers Microwave Fudge Recipe | Kitchen Mason (2024)

FAQs

Easy Maltesers Microwave Fudge Recipe | Kitchen Mason? ›

Break the chocolate into a large microwavable bowl and pour in the condensed milk. Heat in the microwave for 30 seconds then give it a good stir. Repeat, heating in 10 second intervals, until it's all melted and smooth. Working quickly, tip in all except approx 15-20 Maltesers and give your microwave fudge a good mix.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

It sounds like your fudge simply wasn't heated enough. Fudge is basically a superconcentrated syrup, and it sets when sugar dissolved in the water (from the butter and milk) comes out of solution as the mixture cools and forms crystals.

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

However, homemade fudge doesn't always set up into a semi-firm, melt-in-your-mouth confection. If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

Points to remember

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

OMG My fudge is grainy, what do I do? -

Pop the grainy fudge back into the pan along with some water and a little cream and melt the fudge back down to a liquid and re-boil it to temperature. Heat slowly to begin with and make sure the mixture goes completely smooth before bringing it to the boil.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

What happens if you stir fudge too early? ›

Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done.

According to most recipes, the ingredients of fudge are cooked to what is termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.

In his book On Food and Cooking, food scientist Harold McGee writes, “A metal spoon can induce crystallization by conducting heat away from local areas of the syrup, cooling them and so leaving them supersaturated [causing crystallization].” He recommends using a wooden spoon, which doesn't conduct heat.

Grainy Fudge

The sugars probably crystallized, a common mistake when making candy like fudge or caramel. If the melting sugar splashes onto the sides of the pan, it turns back into crystals and causes the fudge to seize up. To avoid this issue, swirl the pan instead of stirring it with a spoon.

Apart from the incorrect temperature, chewy fudge could result from inadequate beating. When it has cooled to 110 to 113 degrees F (43-45 degrees C), beat until it is creamy and smooth. The process could take between 20 and 30 minutes. The mixture should begin to lose it's gloss and become more matte.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

Too Soft or Too Hard Fudge

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

You could also gently heat the fudge with some moisture. This could be done: In the microwave - microwave in short increments with a glass of (warm) water, which creates steam for the fudge to absorb, until the fudge no longer feels/looks dried out.

Once it's at room temperature, stick the fudge into the fridge for 1-2 hours. Lastly, to set fudge completely, put it in the freezer.